Skip to content
EllesmereLocksmith Services
Open 24/7(289) 806-2760Open 24/7
Technician holding a key fob at a folding table with a tablet, loose fobs and a hard case beside a dark SUV.

Ellesmere Locksmith Services

Why we do it this way

A lock only works as well as the door it sits in, so we look at the whole picture. Hinges that have dropped, a strike that has drifted, a frame that swelled after a wet spring: any of these will make a good lock feel like a bad one.

Call (289) 806-2760

Our technicians carry the tools to adjust, shim and reinforce as part of the visit, and they explain what they are doing so you understand why the deadbolt suddenly glides. The same thinking applies to a vehicle door with a worn latch or a shop door whose closer has given up. Fixing the cause instead of the symptom is slower on the day and better for years.

Roll-up black cloth pouch lying open on a worn wooden bench, holding thin metal probes and hooked tools in separate pockets.
Person in a cap and glasses holding an old mortise lock plate against a bare slot in a wooden door edge.

We look after the door, not just the lock.

Key control is the quiet half of security for a business. A patented keyway means blanks are not sold openly, every key is numbered, and a copy needs a signature from someone you named. We register the system, keep the schedule of which key opens which door, and repin a cylinder when a key does not come back, so a staff change never becomes a mystery.

The key you reach for. The door you come home to. Good locksmith work begins with understanding how you use them.

31years in business

24/7open every day

  • Questions welcomed. Ask about the lock, the method, the parts or the reasoning. A good explanation is part of the service, not a favour.
  • Nothing forced that could be finessed. We reach for picks and shims before drills, and we tell you if the lock has left us no gentle option.
  • Swept, wiped and working. Metal filings, drywall dust and old screws all leave with us. The lock is tested from both sides and the key handed over.
Call (289) 806-2760

How a visit goes

Describe the property, the hardware and what has changed, and the visit starts from what you have seen.

Illustration: a phone ringing in front of the locksmith’s shop
  1. Illustration: a ringing phone at the shop, then a work van following a route across a small map to the customer’s house

    01

    Walking the building together

    We visit each door on the plan and talk about who uses it, how often and at what hours. Wiring routes and power are checked at the same time.

  2. Illustration: the van outside the house, a photo ID card by the front door, then the options laid out and one chosen

    02

    Installing readers and locks

    Readers, electric strikes or maglocks and the controller go in with cables hidden where the building allows. Every door is tested for release and re-locking.

  3. Illustration: a key turned in the deadbolt of the front door, with a check mark beside it

    03

    Setting up users and handover

    We add the first users, show your administrator how to add and remove people, and leave written notes so the system is yours to run.

Call(289) 806-2760

Request a visit

Or call (289) 806-2760 · open 24/7