Skip to content
EllesmereLocksmith Services
Open 24/7(289) 806-2760Open 24/7
A silver-colored deadbolt set in clear packaging with two keys resting on the countertop in front. — Lock Rekeying, Bendale
Person holding the black deadbolt and doorknob of a partly open blue front door. — Deadbolt Installation, Bendale

Change or rekey · Bendale

Lock Rekeying in Bendale

The previous owners left a coffee tin of keys on the counter, some labelled, most not.

Call (289) 806-2760

In plain words

A rekeying visit follows a straightforward order. First the locksmith confirms you are entitled to change the locks, which for an owner is identification and for a tenant includes the landlord's agreement. Next comes a walk around the house to list every door to include, read the keyway on each cylinder and check its condition. The cylinders come out one at a time, are pinned to the new key and go back in. Every door is then tested with the new key and with the old one, spares are cut and tried in each lock, and you receive a note of what was done.

Sound familiar?

The builder handed over your new home with a stack of identical keys, and you know the framing crew, the painters and the flooring installers all used a construction key during the build. The doors are brand new, but the key that opens them should be yours alone.

How the visit goes

Inside the lock

What a rekey changes

A deadbolt: the round exterior cylinder with its keyway, the latch and the bolt
  1. A deadbolt seen from the outside: the cylinder, the latch and the bolt

    01

    The lock you already have

  2. The same deadbolt with the housing cut away to show the cylinder and its plug

    02

    Inside the cylinder

  3. Cutaway of the cylinder: springs and top pins above the shear line, bottom pins in the plug

    03

    Pins, springs and the shear line

  4. A new key in the cutaway cylinder, with every pin meeting at the shear line

    04

    A new key, new pins

Lock Rekeying

How the visit goes

Technician in a cap and safety glasses holding a push bar end cap against a metal door with a red drill. — Bendale
Person in a green cap holding a brushed-metal deadbolt against a dark door while a yellow drill rests below it. — Bendale
  1. Counting the keys that are already out there

    Part of planning a rekey is understanding why it is happening. The locksmith asks how many keys exist as far as you know, who has held one, and whether any went missing with something identifying the address. The answers do not change the pinning, but they shape the advice: whether a padlock or mailbox shares the same risk, whether a garage keypad code should change on the same visit, and how many new keys make sense to cut. It also helps to know whether any key is a restricted or patented type, since those are cut from a record rather than duplicated and may involve the original supplier.

  2. Bringing several doors onto one key

    Keying doors alike is the same operation repeated with the same new key. Once the first cylinder is pinned and proven, the locksmith removes the second, follows the plug out, and loads bottom pins to the identical depths so the same key operates it, and so on around the house. Where a door carries a cylinder from a different keyway family, that cylinder is exchanged for a matching one in the same finish and then pinned to the house key. The result is one key on your ring that turns every exterior door, with the individual locks unchanged in appearance and function.

  3. Living with one key for the house

    If the visit brought your doors onto a single key, daily life gets a little simpler: one key opens the front door, the back, the garage's side entry and the shed, and the ring in your pocket shrinks to the car key and one for the house. Anyone you give a key to gets the same freedom, which is convenient for family and worth thinking about for anyone who should only reach one door; that is what a separate group is for. Keypads and smart locks keep their codes, and their override cylinder now takes the same key. If you add a door later, its cylinder can be pinned to match.

Lock Rekeying

In the van

  • Replacement cylinder for odd keyways

  • Key gauge

  • Reset tool for user-rekeyable cylinders

  • Key tags and keying record

  • Pinning tweezers and tray

Roll-up black cloth pouch lying open on a worn wooden bench, holding thin metal probes and hooked tools in separate pockets. — Bendale

Lock Rekeying

What affects the quote

  1. No working key for a door

    When a cylinder must be shimmed, decoded or picked open before it can be repinned because no key exists for it, that extra step is included in the quote for that door.

  2. Mailboxes, padlocks and cabinets

    Small cam locks on mailboxes and cabinets are usually replaced rather than repinned, and padlocks vary in whether they can join the house key; each of these is priced as its own item.

  3. Mismatched keyways needing a cylinder swap

    Where one door's cylinder cannot take the key the other doors share, a compatible replacement cylinder is fitted and pinned to match, and that hardware appears as its own line in the quote.

What to have ready

  • How many new keys will your household or your tenants need?
  • Is there a basement suite or office that should keep its own key?
  • Do you have a working key for every lock, or is there a door with no key at all?
Call (289) 806-2760

Lock Rekeying: questions

Questions
I rent. Can I have my locks rekeyed?

Yes, with your landlord's agreement, which is what the tenancy rules here expect before a tenant changes a lock. Most landlords are glad to consent when a key has gone missing or a former roommate has moved out, and the locksmith will want to hear that the landlord knows and will be holding one of the new keys. The rekey itself runs the same as for an owner, and a short note listing the doors done is handy to pass to the landlord.

My keys were lost with something showing my address. Is rekeying enough?

Rekeying is exactly the right response, because it makes the lost key useless at every door that was pinned. The locksmith will walk the property with you to be sure nothing is missed, including the garage side door, a shed and any padlock the same key opened, and will suggest changing any garage keypad code that was written on the same ring. After that, whoever finds the keys is holding brass that opens nothing on your property.

I am a landlord. Should I rekey between tenants?

Many landlords do, and it removes the question of whether every copy came back. The locksmith rekeys the unit's cylinders so the incoming tenant holds the only working keys, cuts the copies you want, and notes the count for your move-in record. Because provincial tenancy rules expect the tenant to be handed replacement keys whenever a landlord changes a lock, the visit ends with keys for both of you and a clear list of which doors were done.

Related services

Lock Rekeying near you

Call(289) 806-2760

Request a visit

Or call (289) 806-2760 · open 24/7